Coding

Electrical Test Automation Engineer

Status: Open

Mercor

Pay
$70–$85/hr
Location
Remote
Employment type
Contractor
Hours
40 hrs/week
Posted
2026-08-29

About this opportunity

About the Role Mercor is partnering with a leading technology organization to recruit experienced Electrical Test Automation Engineers for a short-term project. Engineers will apply hands-on industry experience in electrical testing, automation, instrumentation, and hardware validation to solve complex technical problems. What You'll Do Design and implement automated test systems, procedures, and test sequences for electrical and electronic hardware. Integrate test instruments, data acquisition systems, and hardware interfaces to automate measurements and testing. Develop test scripts, automation frameworks, and data analysis workflows. Perform functional, performance, validation, regression, and HIL testing where applicable. Analyze test results, troubleshoot hardware and test setups, and identify root causes of failures. Review and validate test methodologies, results, and technical approaches against project requirements. Who Should Apply Electrical Test, Test Automation, Electrical, or Hardware Test Engineers with hands-on industry experience. Bachelor's, Master's, or PhD in Electrical Engineering, Electronics, Instrumentation, Mechatronics, or a related field. Experience developing or executing automated electrical test systems and working with laboratory instrumentation. Proficiency in Python, MATLAB, LabVIEW, C/C++, or equivalent. Experience with test automation, data acquisition, and instrument-control protocols such as SCPI, GPIB, USB, Ethernet, CAN, or RS-232/485. Ability to interpret electrical schematics, test specifications, and technical documentation. Preferred Qualifications Experience with ATE, automated test benches, custom test fixtures, NI hardware, LabVIEW/TestStand, PXI/PXIe, or DAQ systems. Experience with HIL/SIL, automated regression testing, or Python-based test automation. Experience testing power electronics, batteries, EVs, motors, embedded systems, or other complex electrical hardware. Experience with high-voltage or safety-critical systems is a plus. Project Details Duration: Short-term project Work Type: Electrical test automation, technical problem-solving, and expert evaluation We consider all qualified applicants without regard to legally protected characteristics and provide reasonable accommodations upon request.

What you'll do

  • Design and implement automated test systems, procedures, and test sequences for electrical and electronic hardware.
  • Integrate test instruments, data acquisition systems, and hardware interfaces to automate measurements and testing.
  • Develop test scripts, automation frameworks, and data analysis workflows.
  • Perform functional, performance, validation, regression, and HIL testing where applicable.
  • Analyze test results, troubleshoot hardware and test setups, and identify root causes of failures.
  • Review and validate test methodologies, results, and technical approaches against project requirements.

Not the right fit? These open roles are close matches. Browse all AI gigs →

CodingMercor

Radio Frequency and Electromagnetic Engineering Expert

About the Role Mercor is partnering with a leading technology organization to recruit experienced Radio Frequency (RF) and Electromagnetic (EM) Engineering Experts for a short-term project. Experts will apply their hands-on industry experience to analyze and solve complex problems involving RF systems, electromagnetics, antennas, propagation, and related engineering applications. What You'll Do Solve complex technical problems involving RF and electromagnetic engineering. Analyze RF/EM systems, components, antennas, circuits, and architectures. Apply electromagnetic theory, RF principles, and engineering methodologies to real-world scenarios. Analyze technical specifications, system requirements, simulation results, and engineering data. Evaluate design trade-offs, performance limitations, calculations, assumptions, and proposed solutions. Review and validate technical approaches and results, providing technically rigorous solutions and explanations. Follow project-specific technical guidelines and evaluation criteria. Who Should Apply Experienced RF, Electromagnetic, Microwave, Antenna, or related engineering professionals with hands-on industry experience. Bachelor's, Master's, or PhD in Electrical Engineering, Electronics Engineering, RF Engineering, Electromagnetics, or a related field. Strong understanding of electromagnetic theory, RF engineering principles, and signal propagation. Practical experience in one or more of: RF and microwave systems Antenna design and analysis Electromagnetic simulation and modeling RF circuits and components EMC/EMI Wireless communications, radar, or sensing RF propagation and channel modeling RF measurement and testing Experience with tools such as HFSS, CST, COMSOL, MATLAB, ADS, or equivalent is a plus. Candidates with practical experience applying RF/EM principles to real-world engineering systems are strongly preferred. Preferred Qualifications Advanced degree in RF Engineering, Electromagnetics, Electrical Engineering, or a related field. Experience with microwave or millimeter-wave systems, antenna arrays, phased arrays, beamforming, or MIMO. Experience in radar, wireless communications, satellite communications, or RF sensing. Experience with electromagnetic simulation, RF characterization, and laboratory testing. Experience translating theoretical RF/EM concepts into practical engineering solutions. Research experience or publications in RF, electromagnetics, antennas, or related fields is a plus. Project Details Duration: Short-term project Work Type: Technical problem-solving, analysis, and expert evaluation Domain: RF Engineering, Electromagnetics, Antennas, Microwave Engineering, and Wireless Systems We consider all qualified applicants without regard to legally protected characteristics and provide reasonable accommodations upon request.

Contractor· Remote

Status: Open

$80–$95/hr

Verified Nov 17, 2026

Apply → (opens in a new tab)
CodingMercor

Electrical Engineering & Simulation Expert — Hephaestus

Role Overview Mercor is seeking experienced electrical engineers to build and validate technical tasks for AI systems working with circuits, power electronics, control systems, and electrical infrastructure. The work centers on executable engineering models, simulation, debugging, and measurable verification. Contributors create the native engineering files and reference solutions behind each task, run the relevant analyses, and define checks that distinguish a working design from a plausible but incorrect result. Tasks may follow a US standards track (NEC / NFPA 70, NESC, IEEE) or an international track (IEC), as appropriate to the engineering problem. Key Responsibilities Build realistic tasks in one or more specialties: circuit and PCB design, power electronics, power systems, embedded systems, or industrial controls. Create and debug schematics, SPICE netlists, component models, control logic, and other native technical artifacts needed to reproduce a task. Configure operating points, initial conditions, parameter sweeps, transient or steady-state analyses, and fault cases. Assess convergence, model assumptions, and the physical validity of results. Develop reference solutions and verification code that checks outputs such as voltage, current, efficiency, losses, timing, stability, protection behavior, and design constraints, with explicit units and tolerances. Package model files, dependencies, scripts, and results so another engineer can reproduce the work. Validate checks against both correct and deliberately incorrect cases. Review AI-generated engineering artifacts and diagnose failures in the design, simulation setup, or verifier. Use coding agents where helpful while independently checking their output. Ideal Qualifications 5+ years of professional electrical engineering experience, with direct ownership of circuit designs, power systems, controls, or product validation. Recent hands-on experience with relevant tools such as KiCad, Altium, Cadence, SPICE/ngspice, MATLAB/Simulink, or equivalent engineering software. Expertise in every listed tool is not required. Ability to write, inspect, and debug Python or comparable scripts for simulation automation, data analysis, and numerical checks. Sound judgment about component behavior, numerical accuracy, safety margins, and applicable standards; ability to distinguish simulation predictions from measured laboratory evidence. Clear technical writing and a disciplined approach to documenting assumptions, reproducibility, and failure modes. A professional engineering credential and experience with test automation, engineering training, or evaluation design are a plus. Compensation Writers: $70–$80/hour. Reviewers: $90/hour.

Contractor· Remote

Status: Open

$70–$90/hr

Verified Nov 6, 2026

Apply → (opens in a new tab)
CodingMercor

Electrical Engineer

Join a leading AI lab's cutting-edge GenAI team to be at the core of the AI revolution, where your expertise fuels the development of the most advanced Large Language Models. 1\. Overview Join a leading AI lab's cutting-edge GenAI team and help build foundational AI models from the ground up. We're seeking talented Electrical Engineers with deep, hands-on industry experience in circuit design, power systems, or embedded hardware to bring real engineering judgment and elevate the quality of our AI training data. This is a full-time commitment of 40 hours per week for an initial engagement of 3 to 4 months, with a strong possibility of extension. This is a W-2 employment position with Cincinnatus LLC, with the opportunity to be placed at a leading AI Lab as part of their extended workforce. Location: Remote within the United States; San Francisco Bay Area-based candidates strongly preferred. 2\. Key Responsibilities Guide research and engineering teams to close knowledge gaps and improve AI model performance in electrical engineering, including circuit analysis and design, power systems and power electronics, and embedded and control systems. Design challenging, domain-relevant tasks, and write accurate and well-structured reference solutions to electrical engineering problems. Evaluate electrical engineering tasks and model outputs and provide clear, written technical feedback, catching incorrect assumptions, unit and sign errors, violated design constraints, and unsafe design choices. Develop guidelines and detailed rubrics to assess the quality of reasoning across areas such as analog and mixed-signal design, RF, PCB and board-level design, power distribution, signal processing, and controls. Collaborate with other subject matter experts to ensure consistency and accuracy in training data. 3\. Core Qualifications Bachelor's degree or higher in Electrical Engineering, Electrical and Computer Engineering, or a closely related engineering discipline. 5+ years of hands-on professional electrical engineering experience in industry, for example in semiconductors, consumer electronics, power and utilities, aerospace and defense, automotive and EV, robotics, telecommunications, or medical devices. Genuine ownership of real engineering work, for example designing and bringing up circuits or boards, running circuit simulations, specifying power systems, or taking hardware through design reviews, validation, and production. Working fluency with common tools (for example SPICE/LTspice, Cadence, Altium, KiCad, MATLAB/Simulink, or ETAP) and familiarity with relevant codes and standards (for example IEEE, NEC, IPC, or UL). Demonstrable career progression toward senior or lead engineering responsibility. A Professional Engineer (PE) license is a plus but not required. Hands-on working use of large language models in professional work, and the judgment to tell a well-reasoned answer from a plausible-sounding wrong one. Ability to engage reliably for at least 40 hours/week during weekdays. Strong written communication skills and the ability to explain complex technical decisions clearly. About Cincinnatus LLC: Cincinnatus LLC is an enterprise staffing company that partners with leading technology companies to source and employ highly skilled professionals for contingent and contract-based opportunities. Cincinnatus serves as the employer of record for these engagements, providing W-2 employment, payroll, benefits, and compliance, while placing employees directly within client teams to work on high-impact initiatives. Equal Employment Opportunity: Cincinnatus is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, reproductive health decisions, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, genetic information, political views or activity, or any other legally protected characteristic.

Full-time· Remote (United States)

Status: Open

$80–$120/hr

Verified Nov 14, 2026

Apply → (opens in a new tab)